Need help?Do you have a question about the Honda CBR250RA and is the answer not in the manual?
Guidance on motorcycle capacity and weight limits for rider and pillion.
Emphasizes the importance of reading the manual for safety and operational guidance.
Explains safety information located on various labels on the motorcycle.
Details safety warnings indicated by alert symbols and signal words.
Describes types of safety headings, like reminders and precautions.
General advice for rider safety and motorcycle care.
Stresses the importance of helmets for reducing head injury severity.
Advises against exceeding personal abilities or safe riding conditions.
Highlights the dangers of mixing alcohol and riding.
Recommends wearing appropriate gear for rider safety.
Details helmet fit, visibility, and eye protection.
Discusses how weight and loading affect safety and handling.
Specifies the maximum weight capacity of the motorcycle.
Recommends using Honda Genuine Accessories and guidelines for others.
Warns against modifications that affect safety or legality.
Covers speedometer, odometer, tripmeter, fuel, coolant, clock, and tachometer.
Explains neutral, turn signals, high beam, PGM-FI, and ABS indicators.
Details the functions of the MODE and RESET buttons.
Details the 5-step adjustment positions for rear shock absorbers.
Guidance on checking and maintaining front brake fluid levels.
Guidance on checking and maintaining rear brake fluid levels.
Advice on using genuine Honda PRE-MIX COOLANT.
Information on fuel tank capacity and opening the fuel cap.
Procedure for checking engine oil level before riding.
Importance of proper tyre inflation for safety and performance.
Guidelines for checking and replacing tyres based on tread depth.
Advice on tyre repair versus replacement and safety limits.
Recommends using original or equivalent tyres and wheel balancing.
Details the functions of the ignition switch in different positions.
Explains the function of the engine stop switch.
Describes the operation of the starter button.
Control for switching between high and low beams.
Function for flashing the headlight to signal.
Controls for signaling left or right turns.
Activates the motorcycle's horn.
Instructions for locking and unlocking the steering.
Procedure for removing and installing the rear seat.
Procedure for removing and installing the front seat.
Essential checks before each ride for safety and condition.
Checks before starting the engine, including gear position and indicators.
Steps for starting the fuel-injected engine in any temperature.
Procedure for starting a flooded engine.
Explains the function and behavior of the ABS indicator light.
Highlights how maintenance ensures safety and reliability.
General safety rules and warnings for maintenance tasks.
Procedure for coolant replacement, emphasizing dealer service.
Details API classification, viscosity, and suggested oil types.
Steps for removing the front wheel, with precautions.
Procedure for installing the front wheel, including torque specs.
Steps for removing the rear wheel.
Procedure for installing the rear wheel, including torque specs.
How to inspect front brake pads for wear.
How to inspect rear brake pads for wear.
Location and types of fuses for the CBR250RA model.
Location and types of fuses for the CBR250R model.
Information on the location and rating of the main fuse.
Procedure for replacing the headlight bulb.
Procedure for replacing position light bulbs.
Procedure for replacing brake and tail light bulbs.
Procedure for replacing front and rear turn signal bulbs.
Steps for washing the motorcycle safely and effectively.
Steps for preparing the motorcycle for extended storage.
Technical specifications for overall length, width, height, and wheelbase.
Details for engine oil, fuel tank, and cooling system capacities.
Specifications for primary reduction, gear ratios, and final reduction.
Specifications for headlights, tail lights, and turn signals.
Fuse ratings for main fuse and other fuses.
Guidance on motorcycle capacity and weight limits for rider and pillion.
Emphasizes the importance of reading the manual for safety and operational guidance.
Explains safety information located on various labels on the motorcycle.
Details safety warnings indicated by alert symbols and signal words.
Describes types of safety headings, like reminders and precautions.
General advice for rider safety and motorcycle care.
Stresses the importance of helmets for reducing head injury severity.
Advises against exceeding personal abilities or safe riding conditions.
Highlights the dangers of mixing alcohol and riding.
Recommends wearing appropriate gear for rider safety.
Details helmet fit, visibility, and eye protection.
Discusses how weight and loading affect safety and handling.
Specifies the maximum weight capacity of the motorcycle.
Recommends using Honda Genuine Accessories and guidelines for others.
Warns against modifications that affect safety or legality.
Covers speedometer, odometer, tripmeter, fuel, coolant, clock, and tachometer.
Explains neutral, turn signals, high beam, PGM-FI, and ABS indicators.
Details the functions of the MODE and RESET buttons.
Details the 5-step adjustment positions for rear shock absorbers.
Guidance on checking and maintaining front brake fluid levels.
Guidance on checking and maintaining rear brake fluid levels.
Advice on using genuine Honda PRE-MIX COOLANT.
Information on fuel tank capacity and opening the fuel cap.
Procedure for checking engine oil level before riding.
Importance of proper tyre inflation for safety and performance.
Guidelines for checking and replacing tyres based on tread depth.
Advice on tyre repair versus replacement and safety limits.
Recommends using original or equivalent tyres and wheel balancing.
Details the functions of the ignition switch in different positions.
Explains the function of the engine stop switch.
Describes the operation of the starter button.
Control for switching between high and low beams.
Function for flashing the headlight to signal.
Controls for signaling left or right turns.
Activates the motorcycle's horn.
Instructions for locking and unlocking the steering.
Procedure for removing and installing the rear seat.
Procedure for removing and installing the front seat.
Essential checks before each ride for safety and condition.
Checks before starting the engine, including gear position and indicators.
Steps for starting the fuel-injected engine in any temperature.
Procedure for starting a flooded engine.
Explains the function and behavior of the ABS indicator light.
Highlights how maintenance ensures safety and reliability.
General safety rules and warnings for maintenance tasks.
Procedure for coolant replacement, emphasizing dealer service.
Details API classification, viscosity, and suggested oil types.
Steps for removing the front wheel, with precautions.
Procedure for installing the front wheel, including torque specs.
Steps for removing the rear wheel.
Procedure for installing the rear wheel, including torque specs.
How to inspect front brake pads for wear.
How to inspect rear brake pads for wear.
Location and types of fuses for the CBR250RA model.
Location and types of fuses for the CBR250R model.
Information on the location and rating of the main fuse.
Procedure for replacing the headlight bulb.
Procedure for replacing position light bulbs.
Procedure for replacing brake and tail light bulbs.
Procedure for replacing front and rear turn signal bulbs.
Steps for washing the motorcycle safely and effectively.
Steps for preparing the motorcycle for extended storage.
Technical specifications for overall length, width, height, and wheelbase.
Details for engine oil, fuel tank, and cooling system capacities.
Specifications for primary reduction, gear ratios, and final reduction.
Specifications for headlights, tail lights, and turn signals.
Fuse ratings for main fuse and other fuses.
General| Displacement | 249.6 cc |
|---|---|
| Compression Ratio | 10.7:1 |
| Brakes | Hydraulic disc |
| Transmission | 6-speed |
| Front Tire | 110/70-17 |
| Rear Tire | 140/70-17 |
| Engine Type | 4-stroke |
| Bore x Stroke | 76 mm x 55 mm |
| Fuel System | PGM-FI |
| Front Suspension | 37 mm fork |
| Rear Suspension | Pro-Link single shock |
| Front Brake | 296mm single disc |
| Rear Brake | 220mm single disc |
| Length | 2030 mm |
| Width | 720 mm |
| Height | 1125 mm |
| Seat Height | 784 mm |
| Wheelbase | 1369 mm |
| Fuel Capacity | 13.0 L |
To Next Page
