Honda CBR540F - Adjusting the Rear Suspension

Other Adjustments u Adjusting the Rear Suspension
79
Maintenance
Adjusting the Rear Suspension
❙
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Turn the adjuster using the pin spanner and
extension bar provided in the tool kit.
2 P. 57
Use the pin spanner and extension bar to
turn the adjuster. Position 1 is for a decrease
spring preload (soft), or turn the position 3 to
7 increase spring preload (hard). The
standard position is 2.
Attempting to adjust directly from 1 to 7 or 7
to 1 may damage the shock absorber.
NOTICE
Do not attempt to disassemble, service, or improperly
dispose of the damper. See your dealer.
Pin spanner
Extension bar
Adjuster
1
2345
76
14CBR650FFA‑32MJEB000.book79ページ２０１３年１２月２６日 木曜日 午後３時５８分
Honda CBR540F Owner's Manual
http://www.motorcycle.in.th