Dashboard
Instrument
Panel Removal/
Installation
NOTE:
.
When
prying
with a flat-tip screwdriver,
wrap it with
protective
tape, and apply
protective
tape around the
related
parts,
to
prevent
damage.
.
Take
care not
to
scratch
the dashboard and related
pa
rts.
1. Tilt the
steering column down.
2. Remove
the steering column
upper cover
{see
page
17,9).
Remove
the
instrument
panel
(A).
-1
Gently
pull
out along the bottom
to
release
the
clips
(B)
and hooks
(C).
-2
Gently
pull
out the upper
portion
to release
the
clips
(D)
and hooks
(E).
Fastener Locations
B
>:
clip.2 DD,: Clip,2
^*,
4. Installthe
panel
in the reverse
order of removal,
and
push
the clip and hook
portions
into
place
securery.
Driver's Dashboard
Lower
Cover
Removal/lnstallation
NOTE: Take care not
to scratch the dashboard and
related
Parts.
1. Remove
the driver's dashboard lower
cover
(A).
-1
Turn the lock knob
(B)
90".
-2
Gently
pull
out the left side to release
the
hooks
(C),
-3
Pull
out the
panelto
release the hooks
(D).
Installthe
cover in the reverse order of removal,
and
push
the
hook
portions
into
place
securely.
20-59