134
uuGauges and DisplaysuDriver Information Interface
■
Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Refueled are
shown below. The default setting for “Trip A” Reset Timing is Manually Reset.
1. Press the button to select Vehicle
Settings, then press the ENTER button.
2. Press the / button until Meter Setup
appears on the display.
3. Press the ENTER button.
u Language Selection appears first in the
display.
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 134 ページ ２０２０年９月２日 水曜日 午後１時３５分
To Next Page
