593
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
3. Pull the end of the wiper blade to the
direction of the arrow in the image until it
unfastens from the holder’s end cap.
4. Pull the wiper blade in the opposite
direction to slide it out of the holder.
5. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
6. Slide the holder onto the wiper arm, then
push down the lock tab.
7. Lower the passenger side wiper arm first,
then the driver side.
Blade
End Cap At
The Bottom
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 593 ページ ２０２０年９月２日 水曜日 午後１時３５分
To Next Page
