88
uuIndicatorsu
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
Shift Lever
Position
Indicator
●
Indicates the current shift lever
position.
2 Shifting P. 480
—
Transmission
System Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Blinks if the transmission system
has a problem.
●
Blinks while driving - Avoid sudden
starts and acceleration and have your
vehicle checked by a dealer immediately.
Seat Belt
Reminder
Indicator
●
Comes on and the beeper sounds
if you are not wearing a seat belt
when you turn the ignition switch
to ON
(w
*1
.
●
If the front passenger is not
wearing a seat belt, the indicator
comes on a few seconds later.
●
Blinks while driving if either you or
the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
●
The beeper stops and the indicator goes
off when you and the front passenger
fasten their seat belts.
●
Stays on after you or the front
passenger has fastened the seat belt
- A detection error may have occurred in
the sensor. Have your vehicle checked by
a dealer.
2 Seat Belt Reminder P. 43
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 88 ページ ２０２０年９月２日 水曜日 午後１時３５分
To Next Page
