94
uuIndicatorsu
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
*2:Canadian models only: Apply and hold the brake pedal before turning the ignition on.
Indicator Name On/Blinking Explanation Message
Immobilizer
System Indicator
●
Blinks if the immobilizer system
cannot recognize the key
information.
●
Blinks - You cannot start the engine.
Depress the brake pedal, then turn the
ignition switch to LOCK
(0
*1
. Pull the key
out
*2
, and then insert the key and turn it
to ON (w
*1
again.
●
Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
●
Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
Security System
Alarm Indicator
●
Blinks when the security system
alarm has been set.
2 Security System Alarm
*
P. 165
—
Models without
smart entry system
Models with smart
entry system
* Not available on all models
21 CR-V PET ELP_MAP_HMIN_HCM-31TLA6400.book 94 ページ 2020年9月2日 水曜日 午後1時35分