What to do if my Honda Motorcycle has a fuel flow restriction?
If your Honda Motorcycle has a fuel flow restriction, several steps can be taken to resolve this issue. First, disconnect the fuel line at the carburetor and check for any clogging. Next, remove the air cleaner. You should also check the carburetor jets for clogging. Finally, consider installing a larger carburetor main jet.
What to do if my Honda Motorcycle fuel-air mixture is too rich?
If the fuel-air mixture in your Honda Motorcycle is too rich, turn the air screw out.
What to do if my Honda Motorcycle fuel-air mixture is too lean?
If the fuel-air mixture in your Honda Motorcycle is too lean, turn the air screw in.
General| Displacement | 84.7cc |
|---|---|
| Bore x Stroke | 47.5mm x 47.8mm |
| Ignition | CDI |
| Final Drive | Chain |
| Engine Type | Single-cylinder two-stroke |
| Transmission | 6-speed |
| Rear Suspension | Pro-Link single shock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Front Tire | 70/100 |
| Rear Tire | 90/100 |
| Curb Weight | 159 lbs |
| Carburetion | Keihin 28mm carburetor |
Explains DANGER, WARNING, CAUTION signal words and their meaning.
Presents essential safety information, recommendations, and precautions.
Identifies and illustrates the location of various controls and components.
Evaluates rider readiness, condition, gear, and motorcycle pre-ride checks.
Covers safe riding, engine operation, and gear shifting procedures.
Advice on how to break in the new motorcycle for optimal reliability.
Emphasizes maintenance importance and safety precautions.
Lists recommended service intervals and procedures for various items.
Outlines maintenance procedures specific to competition use.
Details checks and adjustments needed before and after events.
Highlights crucial safety measures to follow during maintenance.
How to inspect front suspension components for wear or damage.
Inspection procedures for the rear shock absorber and swingarm.
Adjusting the freeplay and position of the front brake lever.
Checking brake fluid levels and inspecting brake pad wear.
Proper tire inflation and inspection for safety and performance.
Recommendations for choosing and replacing tires.
Procedures for inspecting, adjusting, and lubricating the drive chain.
How to inspect steering stem bearings and handlebar components.
Lubricating cables and checking fasteners for safe operation.
Step-by-step instructions for washing the motorcycle.
Adjusting fork oil volume, compression, rebound damping, and springs.
Adjusting spring preload, rebound, and compression damping for rear suspension.
A chart summarizing suspension adjustments for various symptoms.
Fine-tuning the carburetor for optimal power output and conditions.
Adjusting wheelbase and fork height for handling.
How gearing changes affect power delivery and track conditions.
Choosing the correct tire tread and compound for different terrains.
Adjusting controls and handlebar for rider comfort and responsiveness.
Diagnostic flow charts for common performance issues.
Detailed dimensions, capacities, and technical data for the CR85R/CR85RB.
A list of critical torque values for various fasteners and components.
How to adjust the carburetor for operation at high altitudes.
Information on obtaining official Honda service and owner's manuals.
Benefits of familiarizing yourself with your local Honda dealer.
To Next Page
