20
Engine Stop Switch
Throttle
Front Brake Lever
Operating Controls
Operating Controls
The throttle controls engine rpm (speed). To
increase engine rpm, rotate the grip toward you.
To reduce engine rpm, rotate the grip away
from you. The throttle will automatically return
to the closed position (engine idle) when you
remove your hand.
The front brake lever is used to slow or stop
your motorcycle. To operate, pull the lever. For
information on braking techniques, see
page .
The engine stop switch is used to turn the
engine off during normal riding situations. To
operate, turn the switch to the OFF ( )
position. The switch must be in the RUN ( )
position to start the engine.
36
03/06/17 14:16:16 31GCF670_029
To Next Page
Loading...
