Honda CTX200 - Air Cleaner

−
Refer to the Safety Precautions on page .
Wash the air cleaner in clean, nonflam-
mable or high flash point solvent and let it
dry thoroughly.
Never use petrol or low flash point solvents
for cleaning the air cleaner. A fire or explo-
sion could result.
Soak the air cleaner in gear oil (SAE 80
90) until saturated, then squeeze out the
excess oil.
Remove the air cleaner housing cover (1)
by removing the screws (2).
Remove the nut (3) and the air cleaner
(4). Install the removed parts in the reverse
order of removal.
Removetheleftsidecover(page ).
The air cleaner should be serviced at
regular intervals (page ). Service more
frequently when riding in unusually wet or
dusty areas.
1.
2.
3.
4.
5.
6.
37
53
55
(3)
(2)
(1) Air cleaner housing cover
(2) Screws
(1)
(4)
(3) Nut
(4) Air cleaner
AIR CLEANER
60
02/03/08 18:59:00 32KHA600_070