14
CONTROLS & FEATURES
Parallel Operation Outlets
AC Circuit Protector
PARALLEL OPERATION
OUTLETS
AC CIRCUIT PROTECTOR
(30A)
AC CIRCUIT PROTECTOR
(20A)
30A RECEPTACLE 20A RECEPTACLES
These outlets are used for connecting two EU3000i generators for
parallel operation (see page ). A Honda approved parallel operation
cable kit (optional equipment) is required for parallel operation. This
kit can be purchased from an authorized Honda generator dealer.
The AC circuit protectors will automatically switch OFF if there is a
short circuit or a significant overload of the generator at the 120V 20A
receptacle or 120V 30A twist lock receptacle. If an AC circuit protector
switches OFF automatically, check that the appliance is working
properly and does not exceed the rated load capacity of the circuit
before resetting the AC circuit protector ON.
30
09/12/15 09:49:28 31Z28600_015
To Next Page
Loading...
