31
OPERATION
OVERLOAD INDICATOR
Plug in the appliance following the instruction provided with the
parallel operation cable kit.
Turn on the appliance.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generator.
If the generators are overloaded (see page ), or if there is a short
circuit in a connected appliance, the overload indicator (red) will come
on. If the overload indicator (red) stays on continuously for more than
4 seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go off. Stop both engines and investigate
the problem.
3.
4.
33
09/12/15 09:51:53 31Z28600_032
To Next Page
Loading...
