24
CONTROLS & FEATURES
OIL ALERT/CHECK Indicator
The Oil Alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the OIL ALERT/CHECK indicator
comes ON, and the Oil Alert system will automatically stop the engine
(the MAIN switch will remain in the ON position).
The i-Monitor display will blink ‘‘OIL’’ on the screen and the OIL
ALERT/CHECK indicator will illuminate.
If the engine stops or the OIL ALERT/CHECK indicator comes ON when
you press the ENGINE START button or pull the starter grip, check the
engine oil level (see page
54) before troubleshooting in other areas.
Even when oil is added to the engine, the generator will not restart until
the OIL ALERT/CHECK indicator is reset. To reset the OIL ALERT/
CHECK indicator, turn the MAIN switch to the OFF position, add the
proper amount of oil (see page
54), and then turn the MAIN switch
back to the ON position.
If the OIL ALERT/CHECK indicator blinks, consult your servicing dealer.
OIL ALERT/CHECK INDICATOR (RED)
“OIL” blinks
36Z376000.book 24 ページ ２０１４年９月１９日 金曜日 午後６時２６分
To Next Page
Loading...
Need help?
General
