4. Gear selection (A2 type only)
The transmission on the A2 type tiller offers a choice of two forward speeds
and one reverse. Shift lever positions are indicated on the Gear Shifting Plate.
-GEAR
SHIFTING PLATE
-NEUTRAL
Shift Lever Operation:
1. Return the throttle lever to the extreme right.
2. Release the clutch lever to disengage the clutch.
3. Move the shift lever to the desired gear position.
NOTE: If the shift lever will not engage the desired gear, squeeze the
clutch lever and move the tiller slightly to reposition the gears.
5. Hitch box
Use a hitch pin as shown below to attach the drag bar or any other
attachments to the hitch box.
HITCH BOX
I
12
To Next Page
