Honda F401 - TRANSPORTING AND STORAGE

8. ‘TRANSPORTING/STORAGE
I
I
B When transporting the tiller, turn the fuel valve OFF and keep the
tilled level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
Before storing the unit for an extended period;
1. Be sure the storage area is free of excessive humidity and dust.
2. Drain the fuel . . .
a.’ With the fuel valve turned OFF, remove and empty the sediment cup.
b
by Turn the fuel valve ON and drain the gasoline in the fuel tank into the
’ suitable container.
c.8 Replace the sediment cup and tighten securely.
d.” Drain the carburetor by removing the drain screw.
Drain the gasoline into a suitable container. Replace the drain screw.
p
DRAIN SCREW
SEDIMENT CUP
3. Pull the starter cord until resistance is felt. Continue pulling until the notch
on the starter pulley aligns with the hole on the recoil starter (see
illustration below). At this point, the intake and exhaust valves are closed,
and this will help to protect the engine from internal corrosion.
4. Change engine oil. (If anticipated storage will exceed 1 year’.)
5. Cover tiller with plastic sheet.
22