Honda F401 - TILLER OPERATION; Handlebar Height Adjustment; Tilling Depth Adjustment; Clutch Operation

5. TILLER.OPERATION
1. Handlebar height adjustment
CAUTION: Before adjusting the handlebar, place the tiller on firm level
ground to prevent the handle from collapsing accidentally.
To adjust the handlebar height, loosen
the adjuster, select the appropriate
holes and tighten the adjuster.
2. Tilling depth adjustment
Tilling depth can be adjusted by re-
moving the retainer and sliding the
drag bar up or down as necessary.
3. Clutch
The clutch engages and disengages the
power from the engine to the trans-
mission.
When the clutch lever is squeezed, the
clutch is engaged and power is trans-
mitted.
When the lever is released, the clutch
is disengaged and power is not trans-
mitted.
DRAG
CLUTCHLEVER
DISENGAGED
11