Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level - Fill fuel tank when necessary.
2 P. 109
● Throttle - Check for smooth opening and
full closing in all steering positions. 2 P. 151
● Engine oil level - Add engine oil if necessary.
Check for leaks. 2 P. 141
● Coolant level - Add coolant if required.
Check for leaks. 2 P. 143
● Drive chain - Check condition and slack,
adjust and lubricate if necessary. 2 P. 149
● Brakes - Check operation;
Front and Rear: check brake fluid level and
pads wear. 2 P. 145, 2 P. 146
● Lights and horn - Check that lights,
indicators and horn function properly.
● Engine stop switch - Check for proper
function. 2 P. 74
●
Side stand ignition cut-off system - Check
for proper function. 2 P. 148
● Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 131
20201009081441_32MKV6000_eng_BOOK Page 125 Friday, October 09 2020 08:19:30 JST
Maintenance
122
To Next Page
Loading...
Need help?
General
