Honda Nighthawk CB 750 1993 User Manual

Safety precautions for operation and maintenance, including warnings about hazardous materials.

Details on frame, engine, and carburetor identification numbers and labels.

Technical specifications for various motorcycle components including dimensions, engine, and drive train.

Lists special tools required for maintenance procedures with their respective tool numbers.

General guidance and warnings for frame, body, and exhaust system service.

Common issues and solutions for frame, body, and exhaust systems.

Procedures for removing and installing the exhaust system, including safety notes.

Step-by-step instructions for removing and installing the motorcycle seat.

General guidance for maintenance tasks and references to other manuals.

Locates parts for maintenance tasks, cross-referencing other sections for procedures.

Recommended maintenance intervals based on time and odometer readings.

General guidelines and warnings for the lubrication system, including oil handling.

Common lubrication system problems and their causes, including oil pressure issues.

Visual representation of the lubrication system's flow and components.

Step-by-step procedures for removing and installing the engine oil pump.

General advice and warnings related to the fuel system, emphasizing gasoline safety.

Common fuel system issues and diagnostic steps for engine starting and performance.

Step-by-step procedure for removing and installing carburetors, including fuel cutoff.

Procedure for adjusting pilot screws for idle speed and fuel mixture.

Overview of engine service procedures, components serviceable with engine installed, and those requiring removal.

General notes and guidance for cylinder head, cylinder, and piston service.

Diagnosing and resolving engine top-end performance issues like noise and compression problems.

Procedures for removing and installing the camshaft assembly, including timing marks.

Inspection and installation procedure for hydraulic tappets, including required tools.

General notes and warnings about clutch and gearshift maintenance.

Common problems related to the clutch and gearshift systems.

Steps to remove the clutch assembly from the engine, detailing components.

Procedures for removing and installing the drive sprocket cover.

Overview of crankshaft, transmission, and alternator shaft service, including pre-assembly notes.

Common issues with crankshaft, transmission, and engine vibration.

Steps to remove and install the countershaft bearing cover.

Procedures for separating the engine crankcase halves.

Safety and general notes regarding front wheel, suspension, and steering.

Common problems related to steering, wheel, and suspension.

Procedures for removing and installing the handlebars.

Steps for removing and installing the front fork assembly.

Safety and general information for rear wheel and suspension service.

Common issues with rear wheel and suspension systems.

Steps for removing and installing the rear wheel assembly.

Procedures for removing and installing the rear shock absorber.

Safety warnings and general notes for brake system service.

Common problems with front and rear brake systems.

Procedures for removing and installing the front brake caliper.

Steps for disassembling and assembling the front brake master cylinder.

Important notes and warnings about the charging system and battery.

Diagnostic flowcharts for battery overcharging and undercharging issues.

Steps for safely removing and installing the motorcycle battery.

Procedures for testing leakage current and regulated voltage/amperage.

General advice and warnings for servicing the ignition system.

Diagnostic procedures for no spark or engine performance issues.

Procedure for checking and adjusting ignition timing.

General warnings and component inspection references for the starter system.

Diagnostic steps for starter motor issues like not turning or slow turning.

Steps for removing and installing the starter motor.

Notes on replacing headlight bulbs and checking components.

Diagrams showing the location of lights, meters, and switches.

Procedures for removing and installing the headlight assembly.

Steps for removing and installing the instrument meter assembly.

Troubleshooting guide for starting issues and hard starting.

Diagnostic steps for identifying and resolving engine power loss.

Troubleshooting for issues encountered at high speeds.

Troubleshooting steps for noisy hydraulic tappets.