Charging SystemlAlternator
NOTE
-
For alternator shaWshaft bearing replacement, see page 9-12.
Requiste Service
.
Left side cover removal/installation (page 2-3)
1
Procedure
(5)
Washer
(6)
Fan
B
(7)
Rotor
B
18)
Stator assembly
(1
)
WtY
Remarks
Installation is in the reverse order of removal.
Removal Order
'~lternator wire connector
When removing and intalling, shift the transmission into
gear and apply the rear brake.
(2) Alternator cover bolt
(3) Alternator cover
(4)
Alternator rotor bolt
1
1
To install, align the holes with the holes in rotor
6.
1
Install with the hole aligned with the boss on rotor
A.
1
At installation, align the painted groove with upper right
groove for the alternator cover mounting bolt.
(9)
Rotor Alfan A 1
To Next Page
Loading...
Need help?
General
