To Next PageTo Next Page
Need help?Do you have a question about the Honda GX50 and is the answer not in the manual?
General| Compression Ratio | 8.0:1 |
|---|---|
| PTO Shaft Rotation | Counterclockwise (from PTO shaft side) |
| Ignition System | Transistorized Magneto |
| Starting System | Recoil starter |
| Air Cleaner | Semi-dry type |
| Lubrication System | Forced splash |
| Fuel Type | Unleaded Gasoline |
| Displacement | 49.4 cm³ |
| Net Power Output | 1.47 kW (2.0 HP) @ 7, 000 rpm |
| Fuel Consumption | 0.54 L/h at 7, 000 rpm |
| Oil Capacity | 0.13 liters |
Identifies safety labels and their placement on the engine for hazard awareness.
Illustrates and labels key engine components and controls for user identification.
Details the procedure for inspecting, cleaning, and checking the spark plug gap.
Describes how to inspect and clean the engine's cooling fins for proper heat dissipation.
Outlines steps for inspecting the fuel filter and cleaning the fuel tank.
Explains how to remove, clean, and inspect the spark arrester.
Covers oil type, checking level, and changing the oil.
Details inspecting and cleaning the air filter element.
Verifies engine's general condition, fuel, oil, and air filter before operation.
Covers safety rules, including CO hazards, and step-by-step engine starting.
Provides step-by-step instructions for starting a cold or warm engine.
Details restarting, adjusting speed, and shutting down the engine.
Stresses maintenance importance, safety rules, and precautions during service.
Outlines service intervals and specific maintenance tasks for the engine.
Specifies fuel requirements and instructions for checking and filling the fuel tank.
Details the process of removing and reinstalling the hot air tube for maintenance.
Explains how to add a stabilizer to extend fuel life during storage.
Provides guidance on preparing the engine for storage and cleaning.
Covers draining fuel, storage precautions, and removal from storage.
Advises on cooling the engine before transporting and handling hot components.
Lists common causes and corrections for starting and power issues.
Details engine identification, throttle linkage, and high altitude carburetor adjustments.
Covers warranty, emission sources, and regulatory compliance.
Discusses illegal tampering, emission-related problems, and use of replacement parts.
Outlines the owner's responsibility for performing scheduled maintenance as per the manual.
Provides detailed technical specifications for GX25, GX35, and GX50 engine models.
Lists tune-up specs and quick reference for fuel and maintenance.
Covers warranty information and how to locate authorized dealers.
Details customer support and international warranty terms and exclusions.
