3-2
dummyheaddummyhead
MAINTENANCE
MAINTENANCE
TOOLS
MAINTENANCE SCHEDULE
(1) For commercial use, log hours of operation to determine proper maintenance intervals.
(2) Service more frequently when used in dusty areas.
(3) Check for cracks or abnormal wear; replace if necessary.
(4) In Europe and other countries where the machinery directive 2006/42/EC is enforced, this service should be done by your
servicing dealer.
Valve adjuster wrench, 3 mm
07908-KE90200
Cleaning brush
07998-VA20100
ITEM Perform at every indicated month
or operating hour interval,
whichever comes first.
REGULAR SERVICE PERIOD (1)
Refer
to
page
Each
use
First
month or
20 hrs.
Every
3 months
or
50 hrs.
Every
6 months
or
100 hrs.
Every
year
or
200 hrs.
Engine oil Check level 3-3
Change 3-3
Air cleaner Check 3-4
Clean (2) 3-4
Replace (2) 3-4
Spark plug Check-adjust 3-5
Replace 3-5
Timing belt Check After every 300 hrs (3) 3-6
Spark arrester
(applicable types)
Clean (4) –
Idle speed Check-adjust 3-6
Combustion chamber Clean After every 300 hrs 3-7
Valve clearance Check-adjust 3-7
Fuel tank and filter Clean –
Fuel tube Check Every 2 years (Replace if necessary) –
To Next Page
Loading...
Need help?
General
