1-4
dummyheaddummyhead
SPECIFICATIONS
ENGINE SPECIFICATIONS
*1: The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max net torque). Mass production
engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous
factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.
*2: When tilted at 15°
Model GXR120T GXR120RT
Description code GCCET GCCDT
Type 4 stroke, overhead camshaft, single cylinder
Displacement 121 cm
3
(7.4 cu-in)
Bore x stroke 60.0 x 43.0 mm (2.36 x 1.69 in)
Net power (SAE J1349) *1 2.7 kW (3.6 HP)/3,600 min
-1
(rpm)
Continuous rated power 2.1 kW (2.8 HP)/3,600 min
-1
(rpm)
Maximum net torque (SAE J1349) *1 7.5 N·m (0.8 kgf·m, 5.5 lbf·ft)/2,500 min
-1
(rpm)
Compression ratio 8.5 : 1
Fuel consumption (at continuous rated power) 1.0 Liter (0.26 US gal, 0.22 Imp gal)/h
Ignition system Transistorized magneto ignition
Ignition timing 25° B.T.D.C.
Recommended spark plug CR5HSB (NGK)/U16FSR-UB (DENSO)
Lubrication system Forced splash
Oil capacity 0.28 Liter (0.30 US qt, 0.25 Imp qt) *2
Recommended oil SAE 10W-30 API service classification SE or higher
Cooling system Forced air
Starting system Recoil
Stopping system Ignition primary circuit ground
Carburetor Float type, Horizontal butterfly valve type, Diaphragm type
Air cleaner Single type, Dual type Single type, Dual type, Elbow type
Governor Mechanical centrifugal
Breather system Reed valve type
Fuel used Regular unleaded gasoline (86 pump octane)
P.T.O. shaft rotation Counterclockwise (from P.T.O. side)
To Next Page
Loading...
Need help?
General
