6. STARTING THE ENGINE
1. Turn the fuel valve ON at the source.
2. Move the control lever to the START position.
START
3. Start the engine following the directions that apply to the starter on your
engine.
l
Recoil
Starter
1. Pull the starter grip lightly until resistance is felt, then pull briskly.
CAUTION: Do not allow ‘the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
l Electric Starter (DC or Battery Type)
1. Turn the engine switch to the START position and hold it there until the
engine starts.
CAUTION: Do not use the electric starter for more than 5 seconds at a
time. If the engine fails to start, release the switch and wait 10 seconds
before operating the starter again.
When the engine starts, allow the engine switch to return to the ON
position.
10
To Next Page
Loading...
