To Next PageTo Next Page
Need help?Do you have a question about the Honda HRB536C and is the answer not in the manual?
General| Engine Type | 4-stroke OHC |
|---|---|
| Engine | Honda GCV160 |
| Cutting Width | 53 cm |
| Drive | Self-propelled |
| Cutter Deck Material | Aluminium |
| Wheel Size (front) | 200 mm |
| Wheel Size (rear) | 200 mm |
| Displacement | 160 cm³ |
| Cutting Height Adjustment | 6 positions |
Explains hazard warnings, symbols, and their meanings on the mower.
Details information found on the mower's identification plate.
Describes the function and operation of the fuel valve and throttle lever.
Explains how to operate the blade control and drive clutch levers.
Details the operation of the shift lever and cutting height adjustment levers.
Checks to perform on the lawn before starting operation.
Instructions for inspecting the mower's blades before operation.
Procedure for checking and maintaining the engine oil level.
Information on fuel capacity, refueling, and recommended fuel types.
Instructions for inspecting the air cleaner and adjusting handlebar height.
Steps for installing the grass bag and mulching plug.
How to check and adjust the mower's cutting height settings.
Procedures for starting and stopping the mower's engine safely.
Addresses flooded engines and operation at high altitudes.
Explains operation of throttle, blade, and drive clutch controls.
Guidelines for safe mowing on slopes, around obstacles, and on uneven ground.
Advice on mowing techniques, grass height, blade speed, and patterns.
Guidelines for safely loading, unloading, and folding the mower.
Steps for cleaning and preparing the mower for storage.
Instructions on fuel stabilization and engine cylinder preparation.
How to properly place the mower in storage and prepare it for use.
Emphasizes the importance of maintenance and outlines safety rules.
A schedule detailing routine service intervals and tasks.
Procedures for changing the engine oil.
Instructions for servicing the air cleaner and spark plug.
Details adjustments for blade, drive clutch, and shift control cables.
Steps for removing, installing, and sharpening mower blades.
Maintenance for the grass bag and optional spark arrester.
Solutions for common engine issues like starting and power loss.
Addresses excessive vibration and problems with cut quality.
