3. CONTROLS
10
E
Shift Lever
The shift lever [1] selects and controls the mower’s drive speed.
TXE & TXF
Position 1 for moving slow, mowing
thick grass or maneuvering in small
areas.
Position 2 for medium self-propelled
speed.
Position 3 for maximum self-propelled
speed in large, open areas, and for
transport.
HXE
With the shift lever [1] all the way back
[A] and the drive clutch lever engaged,
the mower will move slowly or not at all.
Use a slow speed for mowing thick
grass or maneuvering in small areas.
Use position [B] for maximum self-
propelled speed in large, open areas,
and for transport.
Cutting Height Adjustment Levers
There are six adjustment settings. The
cutting height figures are approximate.
The actual height of cut grass will vary
with lawn and soil conditions.
There is one adjustment lever [1] on
each wheel.
[1]
[1]
[A]
[B]
75 mm
88 mm
100 mm
HRM536C
HRB536C
To Next Page
Loading...
Need help?
General
