Honda HRN216 Series User Manual

10-5
HRN216 CAMSHAFT/CRANKSHAFT/ PISTON/CYLINDER
INSTALLATION
Install the camshaft and lifters before installing the cylinder (P. 10-8).
During reassembly, recheck the valve clearance (page 3-15
).
6 x 14 mm BOLT (4)
CYLINDER HEAD
COVER
24 N•m (18 ft-lb)
8 x 40 mm BOLT (2)
24 N•m (18 ft-lb)
8 x 25 mm BOLT (2)
CYLINDER HEAD
INSTALLATION: P. 10-6
Do not reuse if bent or
damaged.

Honda HRN216 Series Specifications

General

Cutting Width	21 inches
Deck Material	Steel
Mulching Capability	Yes
Bag Capacity	2.5 bushels
Starting System	Recoil
Bagging Capability	Yes
Side Discharge Capability	Yes
Wheel Size	8-inch front, 8-inch rear
Drive Type	Variable Speed