32
Pull the starter rope tangentially toward the control panel.
Damage may result if the starter grip is pulled while the engine is
running.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
ENGINE SWITCH
ON
ON
·····
STARTER GRIP
DDiirreeccttiioonn ttoo ppuullll
Turn the engine switch to the ON position.
Pull the starter grip lightly until you feel resistance, then pull briskly
in the direction of the arrow as shown below.
5.
6.
07/05/31 14:39:05 3C768600_036
To Next Page
Loading...
