26
Instruments
(Continued)
Clock (12-hour display) & Trip time & Handle
grip heater level
You can switch the modes between clock
and trip time mode by pressing and holding
button.
❙
Clock
To set the clock:
(P28)
❙
Trip time
Displays the time elapsed since the engine
was started.
Display range: 0:00 to 19:59 (hours:minutes)
The display returns to 0:00 when the time
elapsed exceeds 19:59.
❙
Handle grip heater level
When you operate the handle grip heater,
the clock or trip time automatically switch to
the indication for the heater level. The display
will return to the ordinary mode after about
5 seconds.
To operate the handle grip heater:
(P38)
Clock (12-hour display) & Trip time
& Handle grip heater level
Clock
Trip
time
The heater level is displayed for about
5 seconds when the handle grip heater
is on or its level is changed.
Press and hold button.