610
Jump Starting
Turn off the power to electric devices, such as audio and lights. Turn off the power
system, then open the bonnet.
1. Open the terminal cover on your vehicle's
12-volt battery positive + terminal.
2. Connect the first jumper cable to your
vehicle's 12-volt battery + terminal.
3. Connect the other end of the first jumper
cable to the booster battery + terminal.
u Use a 12-volt booster battery only.
u When using an automotive battery
charger to boost your 12-volt battery,
select a lower charging voltage than 15-
volt. Check the charger manual for the
proper setting.
4. Connect the second jumper cable to the
booster battery - terminal.
■
Jump Starting Procedure
If a 12-volt battery sits in extreme cold, the electrolyte
inside can freeze. Attempting to jump start with a
frozen 12-volt battery can cause it to rupture.
Securely attach the jumper cables clips so that they
do not come off when the engine vibrates. Also be
careful not to tangle the jumper cables or allow the
cable ends to touch each other while attaching or
detaching the jumper cables.
A 12-volt battery can explode if you do not
follow the correct procedure, seriously
injuring anyone nearby.
Keep all sparks, open flames, and smoking
materials away from the 12-volt battery.
21 JAZZ HYBRID SSS-32TZA6000.book 610 ページ ２０２０年１月２９日 水曜日 午前１０時３２分
To Next Page
Loading...
Need help?
General
