Honda Marine BF200A User Manual

31
Cooling System Indicator OTHER FEATURES
Water Separator Buzzer
CONTROLS AND FEATURES
COOLING SYSTEM INDICATOR
Water should flow from the cooling
system indicator while the engine is
running. This shows that water is
circulating through the cooling
system.
If water stops flowing while the
engine is running, it indicates a
cooling system problem, such as
clogged water intakes, which will
cause engine overheating.
The water separator buzzer sounds a
rapid, repeating signal when water
has accumulated in the water
separator.
When the alert triggers, the overheat
indicator comes on and the buzzer
sounds a steady tone as the engine
speed is reduced to 1,800 rpm. If the
condition persists for another 20
seconds, the engine shuts off. Refer
to TAKING CARE OF
UNEXPECTED PROBLEMS, on p.
.
Engine overheating may be the result
of clogged water intakes.
All models are equipped with a
buzzer that sounds a steady tone
when the overheat indicator comes
on.
91
05/01/10 14:04:03 31ZY2600_032

Honda Marine BF200A Specifications

General

Displacement	3.6 L
Max Output	200 HP
Cooling System	Water-Cooled
Full Throttle RPM Range	5000-6000 RPM
Starting System	Electric
Lubrication	Wet Sump
Steering	Remote
Trim Method	Power Trim and Tilt
Fuel System	Electronic Fuel Injection
Shaft Length	L, X, XX
Fuel	Gasoline
Engine Type	4-stroke
Ignition System	Transistorized