EasyManuals Logo

Honda Marine BF200A User Manual

Honda Marine BF200A
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
77
Fuel
STORAGE
EXHAUST PORT
FLUSH PORT
CONNECTOR
GARDEN HOSE
Turn on the fresh water supply and
flush the outboard motor for at
least 10 minutes.
After flushing, disconnect the
garden hose and reconnect the
flush port connector.
Connect the garden hose to the
flush port connector.
Gasoline will oxidize and deteriorate
in storage. Old gasoline will cause
hard starting, and it leaves gum
deposits that clog the fuel system. If
the gasoline in your fuel tank and
vapor separator deteriorates during
storage, you may need to have the
vapor separator and other fuel system
components serviced or replaced.
The length of time that gasoline can
be left in your fuel tank and vapor
separator without causing functional
problems will vary with such factors
as gasoline blend, your storage
temperatures, and whether the fuel
tank is partially or completely filled.
The air in a partially filled fuel tank
promotes fuel deterioration. Very
warm storage temperatures accelerate
fuel deterioration. Fuel deterioration
problems may occur within a few
months, or even less if the gasoline
was not fresh when you filled the
fuel tank.
2. 3.
4.
05/01/10 14:09:07 31ZY2600_078

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda Marine BF200A and is the answer not in the manual?

Honda Marine BF200A Specifications

General IconGeneral
Displacement3.6 L
Max Output200 HP
Cooling SystemWater-Cooled
Full Throttle RPM Range5000-6000 RPM
Starting SystemElectric
LubricationWet Sump
SteeringRemote
Trim MethodPower Trim and Tilt
Fuel SystemElectronic Fuel Injection
Shaft LengthL, X, XX
FuelGasoline
Engine Type4-stroke
Ignition SystemTransistorized

Related product manuals