28
Alarm System
(Continued)
Operation Guide
If the ignition switch is left in the (Off)
position for more than 10 days, the alarm
system will no longer operate. To reset the
system, turn the ignition switch to the (On)
position once.
The alarm system uses low-intensity radio
waves. It may affect medical equipment such
as a cardiac pacemaker.
When the battery in the vehicle is weak, the
alarm system may not function.
#
Setting the Alarm System
!a Turn the ignition switch to the (Off)
position or the (Lock) position.
!b Press the SET button. Within a second, the
buzzer rings for 1 time. After 2 seconds, the
buzzer rings 1 time. The alarm system is
activated.
The buzzer sound can be cancelled using
temporary silence mode.
#
Temporary Silence Mode (P35)
The alarm indicator flashes while the alarm
system is activated.
The alarm system is cancelled when ignition
switch is turned to the (On) position.
SET button Alarm indicator
To Next Page
Loading...
