36
Operation Guide
Starting the Engine
Start your engine using the following
procedure, regardless of whether the engine
is cold or warm.
!a Make sure the engine stop switch is in the
(Run) position.
!b Turn the ignition switch to the (On) position.
!c Shift the transmission to Neutral ( indicator
to come on). Alternatively, pull in the clutch
lever to start your vehicle with the
transmission in gear so long as the side stand
is raised.
NOTICE
● If the engine does not start within 5 seconds,
turn the ignition switch to the (Off) position
and wait 10 seconds before trying to start the
engine again to recover battery voltage.
● Extended fast idling and revving the engine
can damage the engine and the exhaust
system.
N
To Next Page
Loading...
