Need help?Do you have a question about the Honda NPS50 RUCKUS 2003 and is the answer not in the manual?
General| Year | 2003 |
|---|---|
| Manufacturer | Honda |
| Model | NPS50 RUCKUS |
| Category | Scooter |
| Bore and Stroke | 37.8 mm x 44 mm |
| Fuel System | Carburetor |
| Ignition | CDI |
| Rear Suspension | Single shock |
| Front Brake | Drum |
| Rear Brake | Drum |
| Front Tire | 120/90-10 |
| Rear Tire | 130/90-10 |
| Starter | Electric |
| Final Drive | Belt |
| Engine Type | Single-cylinder, four-stroke |
| Induction | Carburetor |
| Transmission | Automatic |
| Fuel Capacity | 1.3 gallons |
| Weight | 165 lbs |
Key dimensions, frame, engine, and component specifications.
General precautions, specifications, and recommended maintenance intervals.
Procedures for checking valve clearance and changing engine oil.
Detailed steps for removing, disassembling, inspecting, and installing the oil pump.
Comprehensive guide to carburetor maintenance, including removal and installation.
Steps for draining, refilling, and bleeding the cooling system.
Detailed steps for removing and installing the engine.
Procedures for removing, disassembling, and inspecting the cylinder head and its parts.
Steps for reassembling and installing the cylinder head.
Detailed procedures for drive pulley and clutch removal, inspection, and assembly.
Steps for assembling the final reduction unit.
Detailed procedures for removing and installing the alternator and starter.
Procedures for separating crankcase and removing crankshaft/pistons.
Steps for installing pistons and assembling the crankcase.
Procedures for steering stem and bearing maintenance.
Procedures for battery maintenance and charging system inspections.
Detailed steps for inspecting ignition coil, pulse generator, and sensors.
Diagnosing problems with engine starting and power output.
To Next Page