381
uuHomeLink® Universal Transceiver
*
uTraining HomeLink
Continued
Training HomeLink
If it is necessary to erase a previously entered
learned code:
• Press and hold the two outside buttons for
about 20 seconds, until the red indicator
blinks. Release the buttons, and proceed to
step 1.
• If you are training the second or third
button, go directly to step 1.
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit http://www.homelink.com or call (800)355-3515.
Models without panoramic glass
roof
Models with panoramic glass roof
16 PILOT-31TG76000.book 381 ページ ２０１６年１０月１９日 水曜日 午後５時４分
To Next Page
Loading...
