Continued
497
uuWhen DrivinguAdaptive Cruise Control (ACC)
*
■ There is no vehicle ahead
Your vehicle cruises at the set speed.
■ A vehicle ahead is within ACC range and going slower than the set speed
Your vehicle slows down, and maintains the same speed as the speed of the vehicle
ahead to maintain the set following distance.
■ A vehicle ahead is within ACC range and going at a steady speed
Your vehicle follows the vehicle ahead of it, keeping a constant distance, without
going beyond the set speed.
■ A vehicle ahead goes out of range
ACC accelerates your vehicle to the set speed, and then maintains it.
■ When you depress the accelerator pedal
You can temporarily increase the vehicle speed. In this case, there is no audible or
visual alerts even if a vehicle is in ACC range.
ACC stays on unless you cancel it. Once you release the accelerator pedal, the
system resumes the set speed.
1When in Operation
You can also set the system to beep when a vehicle
detected in front of you comes in and goes out of the
ACC detecting range. Change the ACC FORWARD
VEHICLE DETECT BEEP
*
setting.
2 Customized Features P. 344
Limitations
You may need to use the brake to maintain a safe
distance when using ACC. Additionally, ACC may
not work properly under certain conditions.
2 ACC Conditions and Limitations P. 498
* Not available on all models
16 PILOT-31TG76000.book 497 ページ ２０１６年１０月１９日 水曜日 午後５時４分
To Next Page
