611
uuIf a Tire Goes FlatuChanging a Flat Tire
Continued
4. Remove the cover and the rubber plug on
the cargo area lining to access the shaft
for the spare tire hoist.
5. Put the wheel nut wrench with the jack
handle bar on the hoist shaft.
Turn the wrench to the left to lower the
spare tire to the ground.
6. Keep turning the wheel nut wrench to
create slack in the cable.
7. Remove the bracket from the spare tire.
Jack
Handle Bar
Wheel Nut Wrench
16 PILOT-31TG76000.book 611 ページ ２０１６年１０月１９日 水曜日 午後５時４分
To Next Page
