94
uuIndicatorsu
Indicator Name On/Blinking Explanation Message
Blind spot
information (BSI)
Indicator
*
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Stays on while BSI is turned off.
—
●
Comes on when mud, snow, or
ice accumulates in the vicinity of
sensor.
●
Comes on while driving - Remove the
obstacle in the vicinity of sensor.
2 Blind spot information (BSI) System
*
P. 520
●
Comes on if there is a problem
with the system.
●
Comes on while driving - Have your
vehicle checked by a dealer.
ECON Mode
Indicator
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Comes on when you press the
ECON button.
2 ECON Button P. 485
* Not available on all models
16 PILOT-31TG76000.book 94 ページ 2016年10月19日 水曜日 午後5時4分