−
−
−
▲▼
▲▼
There are three settings you can
choose from:
with REFUEL Trip A Info is reset
every time you refuel your vehicle.
MANUAL ONLY You can reset
Trip A Info when you press and hold
the SEL/RESET button until the
number resets.
IGN OFF Trip A Info is reset
when you turn the ignition switch to
the LOCK (0) position.
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
Trip A Info Reset
Multi-Information Display
106
10/01/26 18:41:40 31SZA620_111
To Next Page
Loading...
