Servicing Your Honda
129
Front Hood
Refer to Safety Precautions on page 115.
The front hood must be removed to add coolant and adjust the
accelerator pedal freeplay.
Removal
1.
Lift the tabs on knobs up, turn the knobs 1/4 clockwise or 1/4
counterclockwise.
2.
Remove the prongs from the grommets.
3.
Remove the front hood.
Installation
1.
Insert the slots into the hooks.
2.
Insert the prongs into the grommets.
3.
Turn the knobs 1/4 counterclockwise or 1/4 clockwise, push the
tabs down to lock the knobs.
Make sure that the hood is securely installed before driving.
While driving, if the prongs of the front hood pop up from the
grommets, stop the vehicle at a safe place and insert the prongs into
the grommets securely.
knobs
hooks
front hood
slots
tabs
to unlock
to lock
grommets
prongs
To Next Page
Loading...
