Instruments & Controls
42
Driver Controls
To check your present drive mode, look at the drive mode indicator.
The drive mode indicator will flash between 2WD mode and I - 4WD
mode for various conditions.
• The drive mode select switch is in I - 4WD mode while the engine
is not running.
• A speed difference between front and rear tires is larger than
allowed by the control program. (Release the accelerator pedal)
• The system detects a malfunction. (See your dealer)
If the indicators do not go out or come on according to the drive
mode, see your dealer.
drive mode select
switch position
2WD I - 4WD
drive mode
indicator
To Next Page
Loading...
