Basic Operation & Driving Guidelines
91
Basic Operation
Selecting a Shift Position
Your Honda SXS has five shift select lever positions: park (P), reverse
(R), neutral (N), high-range (H), and low-range (L).
Park:
Used when parking or starting the engine.
Reverse:
Used when driving in reverse.
Neutral:
Used when idling the engine during a temporary stop.
High-range:
Used when driving forward on hard surfaces or with light
cargo.
You can switch between AT mode and MT mode by pressing the AT/
MT switch. You can also select SPORT mode in AT mode.
Low-range:
Used when driving forward in the following situations:
• When driving with heavy cargo
• When ascending steep hills
• When driving over large obstacles
• When driving at a constant low speed (5 mph [8 km/h] or below)
You can switch between AT mode and MT mode by pressing the AT/
MT switch.
To avoid damaging the transmission, move the shift select lever only
when the vehicle is stopped and the engine is idling.
To Next Page
Loading...
