(2)
(1)
(1) spark plug cap (2) spark plug gap
RIGHT SIDE
122
Spark Plug Inspection & Replacement
Spark Plug
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Clean any dirt from around the spark plug base.
Disconnect the spark plug cap ( ). Take care to avoid damaging the
spark plug wire when disconnecting the cap.
Using a spark plug wrench provided in the tool kit, remove the spark
plug.
Make sure that a 1.2 mm wire-type feeler gauge cannot be inserted
between the spark plug gap ( ). If the gauge fits in the gap, replace
the plug with a new one.
Inspect the electrode and center porcelain for deposits, corrosion, or
carbon fouling. If the corrosion or deposits are heavy, replace the
plug.
5.
4.
1.
2.
3.
1
2
77
07/04/04 11:26:53 31HP1640_131
To Next Page
Loading...
Need help?
General
