Need help?Do you have a question about the Honda UMK425U and is the answer not in the manual?
General| Fuel Type | Unleaded gasoline |
|---|---|
| Shaft Type | Straight |
| Displacement | 25 cc |
| Fuel Tank Capacity | 0.58 liters |
| Handle Type | Loop |
| Engine | 2-stroke, single cylinder, air-cooled |
Ensures the engine has sufficient and clean oil before operation.
Verifies the fuel tank has the correct type and amount of unleaded petrol.
Checks the nylon-line head or cutting blade for damage or looseness.
Checks the cutting blade for wear, damage, and nut tightness.
Ensures the debris shield is correctly installed and undamaged.
Adjusts harness length for correct trimmer posture and balance.
Guidance on holding the trimmer, maintaining balance, and operating safely.
Details regular service intervals for various components.
Procedure for draining and refilling the engine oil.
Steps for replacing the nylon-line cutting head or cutting blade.
Detailed procedure for replacing the cutting blade.
Procedure for checking, cleaning, gapping, and replacing the spark plug.
To Next Page
