Honda WT40 - Pump Casing Cleaning

40
SERVICING YOUR PUMP
PUMP CASING CLEANING
After each use, clean the inside of the pump casing using the following
procedure:
Removal:
1. Remove the drain plug from the pump cover using the wrench to drain the
water inside.
2. Loosen the pump cover knobs
using the wrench.
3. Remove the pump cover and the
volute case from the pump
casing, and remove any debris
from pump casing and volute
case.
DRAIN PLUG
WRENCH
WRENCH
WRENCH
KNOBS (4)
KNOBS (4)
VOLUTE
CASE
O-RING
PUMP CASING
PUMP COVER
31YG06130.book 40 ページ ２０２１年１月２０日 水曜日 午前９時２７分