EasyManuals Logo

Honda XRM125 2018 User Manual

Honda XRM125 2018
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
51
Maintenance
continued
Spark Plug
Checking Spark Plug
For the recommended spark plug, see
“Specifications.” 2 P. 101
Use only the recommended type of spark plug
in the recommended heat range.
1.
Disconnect the spark plug cap from the
spark plug.
2.
Clean any dirt from around the spark plug
base.
3.
Remove the spark plug using the spark
plug wrench provided in the tool kit.
4.
Inspect the electrodes and centre porcelain
for deposits, erosion or carbon fouling.
u If the erosion or deposit is heavy,
replace the plug.
u Clean a carbon or wet-fouled plug with
a plug cleaner, otherwise use a wire
brush.
NOTICE
Using a spark plug with an improper heat range can cause
engine damage.
Spark plug wrench
Spark plug cap
18 CFT125MS MR MRC (PH)-32KPYA100.book Page 51 Friday, June 9, 2017 6:03 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda XRM125 2018 and is the answer not in the manual?

Honda XRM125 2018 Specifications

General IconGeneral
Bore x Stroke52.4 mm x 57.9 mm
Compression Ratio9.3:1
Fuel SystemCarburetor
Ignition SystemCDI
Final DriveChain
Front SuspensionTelescopic fork
Front BrakeHydraulic Disc
Front Tire70/90-17
Rear Tire80/90-17
Seat Height775 mm
Curb Weight105 kg
Transmission4-speed
Starting SystemElectric and Kick
Rear SuspensionTwin
Rear BrakeDrum
Engine Type4-stroke, air-cooled, OHC

Related product manuals