Honeywell Home C1 User Manual

4
Wi-Fi connection LEDs
During WiFi connection, the LED indicates the following.
LED Camera state
Blinking Green Connecting to WiFi network.
Solid Green Connected to WiFi network.
Solid Red (for
2 seconds)
Connection failed. LED will then turn solid purple.
Solid Purple QR Code scan complete. Go to “Connect to WiFi” on page
3.
Blinking Blue Camera has lost bluetooth connection. Unplug camera
and plug it back in. See “Connect the power cord” on page
2 for instructions.
Options
Choose your Geofencing and Honeywell Membership options (if you skip them you
can change them easily later).
Placement
With stand
Place the camera in a desired location for
viewing and recording.
On the wall
You can also mount the camera directly to the
wall without the stand.

Honeywell Home C1 Specifications

General

Brand	Honeywell Home
Model	C1
Category	Security Camera
Language	English