Note: If the LED turns solid red, it means the connection mode timed out. Unplug the camera and plug it back in.
Connect
Connect to mobile device
1. Enable Bluetooth on your mobile device.
2. The app will look for the camera.
● For one camera, it will connect automatically.
● For more than one camera, the app will prompt you to select one camera at a time. Each camera has a unique MAC ID printed on the back. Use that ID to select the
camera you want to connect.
3. A QR code will display in the app. To connect your camera to the app, hold the QR code approximately 3-6 inches (7-15 cm) from the camera lens.
4. The camera LED turns purple and the camera beeps.
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network you wish to connect your camera to.
1. Choose your Wi-Fi network from the list.
Tap NEXT.
2. Enter your Wi-Fi password, if necessary.
Tap DONE.
Note: The camera will beep during some steps in this process.
Wi-Fi Connection LEDs
During Wi-Fi connection, the LED indicates the following.
To Next Page
Loading...
Need help?
General
