Honeywell Home C7089R1013/U User Manual

C7089R3013
RedLINK® 3.0
Wireless Outdoor
Sensor
Installation Guide
M38084A
T10+ Thermostat
Optional
outdoor
air sensor
M38793
12:30
74
83
Equipment Interface Module
Optional
THM04R
EIM
HVAC equipment
Français : voir la page 5 • Español: vea la página 9
Installation procedure
Install batteries in RedLINK 3.0 outdoor sensor ......................................... Page 2
Link to wireless network ............................................................................................ Page 2
Mount outdoor sensor ............................................................................................... Page 3
To replace system components, if needed, see page 5.
If there is more than one T10+ thermostat:
Wireless devices must be linked separately to each T10+ thermostat (eight T10+
thermostats max per C7089R3013 sensor).
1
2
3
33-00604EFS-05

Honeywell Home C7089R1013/U Specifications

General

Brand	Honeywell Home
Model	C7089R1013/U
Category	Security Sensors
Language	English

Summary

Installation Procedure

Install Batteries in Outdoor Sensor

Install 2 fresh AA lithium batteries into the RedLINK 3.0 wireless outdoor sensor.

Link Wireless Sensor to Thermostat

Link the RedLINK 3.0 wireless outdoor sensor to a T10+ thermostat via the thermostat menu.

Mount Outdoor Sensor

Mount the sensor on a vertical exterior wall, protected from sunlight, at least 6 inches below overhang.

Replace Outdoor Sensor

Procedure to delete an existing outdoor sensor from the T10+ thermostat and add a new one.

Regulatory and Compliance Information

FCC Compliance and Warnings

FCC compliance statements, warnings about modifications, and interference guidelines for USA users.

FCC Interference Statement

Details on Class B digital device limits and how to correct potential radio or TV reception interference.

Outdoor Sensor RF Exposure Limits

RF exposure compliance for general population, requiring a 20 cm separation distance from persons.

RSS-GEN Section 7.1.5

Operational conditions for interference acceptance and prevention as per RSS-GEN.