Honeywell Home C7089R1013 User Manual

C7089R3013
RedLINK® 3.0
Wireless Outdoor
Sensor
Installation Guide
M38084A
T10+ Thermostat
Optional
outdoor
air sensor
M38793
12:30
74
83
Equipment Interface Module
Optional
THM04R
EIM
HVAC equipment
Français : voir la page 5 • Español: vea la página 9
Installation procedure
Install batteries in RedLINK 3.0 outdoor sensor ......................................... Page 2
Link to wireless network ............................................................................................ Page 2
Mount outdoor sensor ............................................................................................... Page 3
To replace system components, if needed, see page 5.
If there is more than one T10+ thermostat:
Wireless devices must be linked separately to each T10+ thermostat (eight T10+
thermostats max per C7089R3013 sensor).
1
2
3
33-00604EFS-05

Honeywell Home C7089R1013 Specifications

General

Brand	Honeywell Home
Model	C7089R1013
Category	Security Sensors
Language	English

Summary

Installation Procedure Overview

Install Batteries

Install 2 fresh AA lithium batteries in the wireless outdoor sensor, observing polarity marks.

Link Sensor to Thermostat

Link the RedLINK 3.0 wireless outdoor sensor to a T10+ thermostat via the thermostat's menu.

Mount Outdoor Sensor

Mount the sensor on a vertical exterior wall, at least 6 inches below overhang, protected from sunlight.

Replacing Outdoor Sensor

Delete Existing Sensor

Navigate through T10+ thermostat menus to select and delete the current outdoor sensor.

Regulatory Information

FCC Compliance and Interference Statements

Details FCC compliance, warnings, and interference guidelines for the device.

RF Exposure Compliance

Ensures compliance with FCC and Industry Canada RF exposure limits for personal safety.

RSS-GEN Compliance

Outlines conditions for compliance with Section 7.1.5 of RSS-GEN for device operation.